Sanyo DP32746 - Manual (Page 23)

23 Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
TO DELETE CHANNELS FROM THE
CHANNEL SCAN MEMORY
3 Use the CHANNEL (CH ▲▼) keys or
numerical keys to select desired channel.
HINT: Press the TUNER key to switch
between Digital and Analog Channel Scan
memories.
4 Press the ENTER key to delete the channel.
The display will change to “deleted.”
NOTES: “Delete?” will appear below the channel
number if the selected channel is already in
the Channel Scan Memory.
Use the Number keys to tune to active chan-
nels not in the Channel Scan Memory list.
CHANNEL SCAN MEMORY
Channel Scan Memory is a list of active channels
that you can scan through using the CHANNEL
SCAN CH
▲ (up) CH ▼ (down) keys. This list can
be customized by deleting and/or adding channels.
1 Press the MENU key to display the Main
menu.
2 Use the CURSOR
▲▼ keys to highlight
(green) Channel Scan Memory. Press
ENTER.
■
When a digital channel is deleted, all of that channel’s
sub-channels are deleted as well.
■
Only previously deleted digital channels can be added
back to the Channel Scan Memory.
■
If one digital sub-channel is added back to the Channel
Scan Memory all of that channel’s sub-channels will be
added back.
■
If the last remaining digital channel is deleted, the entire
previous Channel Scan Memory list will be restored
automatically.
■
If the last remaining analog channel is deleted (cable or
off-air channel), ALL analog channels (cable or off-air)
will be restored automatically, regardless of the previous
Analog Channel Scan Memory list.
TO ADD A CHANNEL TO THE CHANNEL
SCAN MEMORY
3 Use the numerical keys 0 ~ 9 to select
desired channel number. “Add?” will appear
below the channel number. HINT: Press the
TUNER key to switch between Digital and
Analog Channel Scan memories.
4 Press the ENTER key to add the channel.
The display will change to “Added.”
When you have finished adding and/or deleting
channels, press the EXIT key to return to normal
DTV viewing.