Star Micronics LC-1021 - Manual (Page 15)

Installing the paper guide 9
❏
Open the front cover of the printer.
❏
By hand, move the cartridge holder to the left side where there is a cutout in
the top guide to allow easy installation and removal of the ribbon cassette.
❏
Using your thumb and forefinger to squeeze the two tabs on the ribbon
cassette towards the center, carefully remove the cassette from the holder.
❏
Use the procedure under “Installing the ribbon cassette” on page 6 to install
a new cassette.
Installing the paper guide
❏
Insert the two tabs on the rear cover of the printer into the holes in the
bottom of the paper guide.
❏
To remove the paper guide from the printer, simply pull the tabs out of the
holes.