Star Micronics LC-1021 - Manual (Page 22)

16 Printer Setup
Printing on fanfold paper
When printing on fanfold paper, take care not to print too close to the
perforations that separate each sheet. The following shows the recommended
print area for fanfold paper, cut-sheet paper and label paper.
Cut-sheet paper
5 mm
8 mm (0.31")
5 mm
4 mm (0.16")
(0.2")
(0.2")
Fanfold paper
4 mm (0.16")
18 mm 18 mm
(0.7")
25.4 mm (1")
(0.7")
25.4 mm (1")
25.4 mm (1")
Bottom of Form
Perforation
110 mm (4.3")
25.4 mm (1")
First page
Last page
Perforation
2.54 mm (0.1") min.
6.35 mm
(0.25")min.
Label
C
C
C
C
C : 2.54 mm (0.1") min.
6.35 mm
(0.25")min.
Perforation
Label
* The accuracy of the paper feed
cannot be guaranteed within
20 mm (0.79") from bottom
of the page.