Star Micronics LC-1021 - Manual (Page 63)

57
Printer behaves erratically.
Printing suddenly stops.
The interface cable is
connected incorrectly or
damaged. Check to make sure that the
printer interface cable is
connected correctly. If it is,
try a different cable.
Static electricity caused by
interference from nearby
electrical devices or by low-
level humidity is affecting
printer operation. Make sure that the printer is
not too close to any devices
with electric motors or try to
raise the humidity level.
Automatic Sheet Feeder
does not feed paper. The EDS Mode setting for
the Automatic Sheet Feeder
is wrong. Enter the EDS Mode and
turn off Switch 4 in Bank A
(see page 31).
Problem Possible Cause Recommended Action