Sharp UP-3300 - Manual (Page 146)

143
■ PLU stock
You can assign a stock quantity to each PLU code.
Shown below is an example of selecting “1 OVER WRITE.”
After selecting “1 OVER WRITE,” select a pertinent PLU code.
Then the next screen will appear to show the following items:
• CURRENT STOCK
The current stock is displayed.
• NEW STOCK (Use the numeric entry)
Enter a new stock quantity (max. 7 digits: 1 to
9999.999(9999999))
NOTE
• If you need to add or subtract a stock quantity to or from the
current stock quantity, select “2 ADD” or “3 SUB” and enter a
value to be added or subtracted.
• You cannot enter any values for the item marked with “!”.
• The entry of a new stock value will update to the PLU stock
counter.
Procedure
▼
Select a pertinent PLU code from
the PLUs list.
▼