Sharp UP-3300 - Manual (Page 158)

155
■ Department shift
Program the item as follows:
• DEPT. SHIFT 1 through 4 (Use the numeric entry)
Enter an associated department code for each department
shift key (max. 2 digits).
NOTE
If an associated department code which was changed by the
D.SFT1 through D.SFT4 keys is “00,” it will not change. In this case, an
error will occur.
Procedure
Procedure
■ Happy hour
You can program a time range for each price level. When a clerk enters a PLU code, the price level for
which you have programmed a time range will be automatically entered. For example, if you program the
time range 9:00 AM to 11:00 AM for price level 2, only the price programmed for price level 2 is entered
from 9:00 AM to 11:00 AM.
Program the item as follows:
• SFT1 through SFT7 START TIME and END TIME
(Use the numeric entry)
Enter the starting and ending times for each price level
(time range: 0000 to 2359).
NOTE
When the starting and ending times are set at “0000,” the “Happy
hour” function is not available.
The screen continues.