Sharp UP-3300 - Manual (Page 214)

211
Procedure
▼
IR Data Send Programming
Use the following procedure to select the menu option “17 IR DATA SEND”:
■ IR data send
Your POS terminal can send data to another device by infrared rays.
Program the item as follows:
• TO (Use the selective entry)
Select one of the following options to send data to another
device:
ECR (IrDA):
Selects “IrDA” for the communication
system to communicate with another POS
terminal.
ECR (ASK): Selects “ASK” for the communication
system to communicate with another POS
terminal.
ER-02FD (ASK): Selects “ASK” for the communication
system to communicate with the ER-
02FD.
• SEND DATA (Use the selective entry)
Select one of the following options (data sources):
ALL RAM
STANDARD RAM(1)
STANDARD RAM(2) UP-P02MB2(1)
UP-P02MB2(2) UP-P02MB2(3)
UP-P02MB2(4) SSP
RESERVED 1 RESERVED 2
RESERVED 3 RESERVED 4
• SPEED (Use the selective entry)
Select one of the following options (data transmission
speeds):
PROGRAMMED SPEED: Sends data at a programmed
speed.
115200bps: Sends data at 115200 bps (for “IrDA” only).
57600bps:
Sends data at 57600 bps.
38400bps: Sends data at 38400 bps.
19200bps: Sends data at 19200 bps.
9600bps: Sends data at 9600 bps.
4800bps: Sends data at 4800 bps.
2400bps: Sends data at 2400 bps.