Sharp UP-3300 - Manual (Page 212)

209
Procedure
▼
Drive-through Code Programming
Use the following procedure to select the menu option “15 DRIVE THRU”:
■ Drive-through code
You can program the range of available drive-through codes.
Program each item as follows:
• START CODE (Use the numeric entry)
Starting drive-through code (max. 8 digits: 1 to 99999999)
• END CODE (Use the numeric entry)
Ending drive-through code (max. 8 digits: 1 to 99999999)
• TIME (Use the numeric entry)
Drive-through target time:
Enter the minute (2 digits) and the second (2 digits) in this
sequence.
NOTE
When the customer’s waiting time is over the programmed
target time, the terminal will display a warning.