Sharp UP-3300 - Manual (Page 208)

205
■ Journal printer
You can program various printing functions for journal printer.
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter “0” for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as “0”, no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
SHARP ER-01PU
SHARP UP-T80BP
SHARP ER-03/04RP EPSON TM-300
EPSON TM-T88/85 EPSON TM-U950
EJ FILE (Electronic journal file)
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO:
Disables auto cutter function.
NOTE
When “ER-03RP” is connected, select “NO.”
When “EJ FILE” is used, select “NO”.
• PAPER SHEET (Use the selective entry)
Select a paper type.
TWO OR MORE:
Uses two or more sheets.
ONE SHEET: Uses one sheet.
NOTE This option is available when the “TM-300” is selected.
Procedure
Procedure
■ Receipt printer
You can program various printing functions for each printer.
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter “0” for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as “0”, no RS-232 channel is assigned.
• PRINTER NAME (Use the selective entry)
Select the printer to be used.
SHARP ER-01PU
SHARP UP-T80BP
SHARP ER-03/04RP EPSON TM-300
EPSON TM-T88/85 EPSON TM-U950