Appendix: manual network configuration – Sony TTR1 User Manual

Page 72

Advertising
background image

72

Appendix: Manual Network Configuration

g.

Turn the TUNE Knob to highlight Wired .
Press the TUNE Knob .

h.

Will you be using DHCP? Turn the TUNE
Knob
to highlight DHCP enable or DHCP
disable
and press the TUNE Knob .

i.

If you have selected DHCP disable, enter
the following information . Otherwise, continue with step j .

For each entry, Turn the TUNE knob to select the numbers, and press
the TUNE knob to confirm and move to the next number . Press BACK if
you entered an incorrect number .

TIP! You can use the Remote Control to increment the numbers (

), and move

forward or backward through the number fields ( + and ) .

i . Enter the IP address to use for the Radio .
ii . Enter the Subnet Mask IP address for the network .
iii . Enter the Gateway IP address for the

network .

iv . Enter the Primary DNS IP address for

the network .

v . Enter the Secondary DNS IP address

for the network, or leave blank if there
is none .

j.

If you have entered the correct information, and the Radio is able to
connect to your network, the Connected screen will be displayed . If
not, the Failed to connect screen is displayed . This means that one or

IP settings

IP address

. 0 . 0 . 0

Subnet mask

.

255 255 . 255 . 0

0

Wired

Wireless

>

>

Connection type

1/9

Advertising