Sony SRSDZ10 - Manual (Page 22)

22 GB
Connecting the audio cords
Outputs TV sound through the speakers of this system.
To connect the AUDIO OUT jacks of a TV to the TV/VCR (AUDIO IN)
jacks of this system
Connect a TV to the TV/VCR (AUDIO IN) jacks using an audio cord (not supplied). When connecting
a cord, be sure to match the color-coded sleeves to the appropriate jacks on the components.
• Be sure to make connections securely to avoid hum and noise. If using the TV/VCR jacks distorts the sound, change
the attenuate setting (page 62).
• If your TV does not have AUDIO OUT jacks, you cannot output the TV sound from the speakers of this system.
• If you connect a TV to the TV/VCR (AUDIO IN) jacks, other components, such as a VCR, cannot be connected.
• To listen to the TV sound, select the function by pressing FUNCTION. For details, see page 54.
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby
Pro Logic,” “Dolby Pro Logic II MOVIE,” or “Dolby Pro Logic II MUSIC” sound field (page 52).
• When you select the “NIGHT” sound field (page 52), the sound is output from the front speakers only.
Note
Tip
SPEAKER COAXIAL
FM 75
Y R L AUDIO IN P B /C B P R /C R
DVD ONLY
COMPONENT VIDEO OUT TV / VCR
AM
VIDEO
S VIDEO
(DVD ONLY)
MONITOR OUT
FRONT R FRONT L SUR R SUR L CENTER WOOFER
R
AUDIO
OUT
L
TV
To TV/VCR
(AUDIO IN)
White (L/audio)
Red (R/audio)