Sony SRSDZ10 - Manual (Page 24)

24 GB
Before connecting the AC power cord (mains
lead) of this system to a wall outlet (mains),
connect the speakers to the system (page 14).
Install this system so that the power cord can be
unplugged from the wall socket immediately in
the event of trouble.
To turn on the system
Press "/1.
To turn off the system
Press "/1. The system enters standby mode.
While playing a disc, do not turn off the system
by pressing "/1. Doing so may cancel the menu
settings. When you turn off the system, first
press x to stop playback and then press "/1.
After connecting the AC power cord (mains
lead), the demonstration appears in the front
panel display. When you press "/1 on the
remote, the demonstration turns off.
• When you press "/1 on the system, the demonstration
does not turn off.
• When you set the demonstration mode in the AMP
menu to on, the demonstration does not turn off even
though you press "/1 on the remote. To turn off the
demonstration, set the demonstration mode to off,
then press "/1 on the remote.
Setting the demonstration
mode on/off
1
Press AMP MENU.
2
Press X/x repeatedly until “DEMO”
appears in the front panel display, then
press ENTER or
c.
3
Press X/x to select the setting.
• DEMO OFF: sets the demonstration mode
off.
• DEMO ON: sets the demonstration mode
on.
4
Press ENTER or AMP MENU.
The AMP menu turns off.
Step 5: Connecting the AC
Power Cord (Mains Lead)
"/1
"/1
Step 6: Turning off the
Demonstration
Note
AMP MENU
X/x/c
ENTER
"/1