Sony SRSDZ10 - Manual (Page 62)

62 GB
• This function is only for SONY TVs. (This function
may not work on some SONY TVs.)
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
• Keep the remote pointed in the direction of the TV
and this system while entering the code.
Selecting the connected
component
You can use a VCR or other components
connected to the TV/VCR jacks on the rear
panel. Refer to the operation manual supplied
with the components for further information on
the operation.
Press FUNCTION repeatedly until “TV” or
“VCR” appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
When “ATTENUATE” is set to “ATT ON.”
DVD t TUNER FM t TUNER AM t TV
t DVD t ...
When “ATTENUATE” is set to “ATT OFF.”
DVD t TUNER FM t TUNER AM t VCR
t DVD t …
For details on “ATTENUATE,” see page 63.
Note
Enjoying the Sound of
Other Components
AMP MENU
X/x/c
ENTER
FUNCTION