Sun Microsystems Sun StorEdge T3 - Manual (Page 23)

Chapter 1 Array Configuration Overview 11
■ Switches are not supported.
■ Hubs must be used.
■ The Sun StorEdge SBus FC-100 (SOC+) HBA and the onboard SOC+ interface in
Sun Fire™ systems are supported.
■ On Sun Enterprise 6x00/5x00/4x00/3x00 systems, a maximum of 64 arrays are
supported per cluster.
■ On Sun Enterprise 10000 systems, a maximum of 256 arrays are supported per
cluster.
■ To ensure full redundancy, host-based mirroring software such as Solstice
DiskSuite (SDS) 4.2 or SDS 4.2.1 must be used.
■ Solaris 2.6 and Solaris 8 are the only supported operating systems.
Note – Refer to the latest Sun Cluster documentation for more information on Sun
Cluster supported array configurations and restrictions.