System requirements – Sun Microsystems Sun StorEdge T3 User Manual
Page 67
Chapter 5
Host Connections
55
Sun StorEdge PCI Single Fibre Channel
Network Adapter
The Sun StorEdge PCI Single Fibre Channel network adapter is a Fibre Channel PCI
card with one onboard optical receiver. This network adapter is PCI Version
2.1-compliant. For more detailed information about this product, refer to the Sun
StorEdge PCI Single Fibre Channel Network Adapter Installation Guide, part number
806-7532-xx.
shows a Sun StorEdge PCI Single Fibre Channel network
adapter.
FIGURE 5-4
Sun StorEdge PCI Single Fibre Channel Network Adapter
System Requirements
Your system must meet the following hardware and software requirements:
■
An available PCI port
■
A release of the Solaris operating environment that supports this board. The first
release that supports this board is the Solaris 7 11/99 operating environment.