Sun storedge sbus fc-100 host bus adapter, System requirements – Sun Microsystems Sun StorEdge T3 User Manual
Page 66
54
Sun StorEdge T3 and T3+ Array Configuration Guide • August 2001
Sun StorEdge SBus FC-100 Host Bus
Adapter
The Sun StorEdge SBus FC-100 host bus adapter is a single-width Fibre Channel
SBus card with a Sun Serial Optical Channel (SOC+) ASIC (application-specific
integrated circuit). You can connect up to two loops to each card, using hot-
pluggable GBICs. For more detailed information about this product, refer to the Sun
StorEdge SBus FC-100 Host Adapter Installation and Service Manual, part number
802-7572.
shows a Sun StorEdge SBus FC-100 host bus adapter.
FIGURE 5-3
Sun StorEdge SBus FC-100 Host Bus Adapter
System Requirements
Your system must meet the following hardware and software requirements:
■
An available SBus port
■
A release of the Solaris operating environment that supports this board. The first
release that supports this board is the Solaris 2.6 operating environment.