Speco Technologies SIPMPBVFH - Manual (Page 27)

2-23
Video streaming
port (TCP Only) Select the port used by this IP device for Video
Streaming.
Video Multicast
Port
Enable/disable multicast audio streaming
RTSP port
Select the port assigned for RTSP protocol access
RTP Multicast
Video Port for
Media1
Select the port for the multicast video streaming of
media1 via RTP protocol
RTP Multicast
Audio Port for
Media1
Select the port for the multicast audio streaming of
media1 via RTP protocol
RTP Multicast
Video Port for
Media2
Select the port for the multicast video streaming of
media2 via RTP protocol
RTP Multicast
Audio Port for
Media2
Select the port for the multicast audio streaming of
media2 via RTP protocol
Multicast IP
Select the multicast IP. Default settings is 228.5.6.1
Multicast TTL
Select the multicast TTL. Default setting is 255.
IGMP
Select video type connected to the video-in of this IP
device. If you use an incorrect video type, some images
might be lost.
Click the [Apply] button to confirm the settings or click the [Reset] button to
re-enter the parameters.