Speco Technologies SIPMPBVFH - Manual (Page 59)

2-55
Once the process is finished, the progress bar will show the upgrading as OK, and reboot
the IP device system.
NOTE: If you cancel the firmware upgrade during upgrade process, the browser window will be
closed
Profile Upload
Profiles are sets of parameters that control how the image sensor behaves. Sometimes
profiles are fine-tuned again to suit a specific environment, or for generally better image.
They are not updated as frequently as firmware, and a good profile can stay in use for a
very long time. Occasionally, you may wish to load a new profile pack into your camera.
This section tells you how to upgrade IP Camera’s Profile Pack.
Click the [Profile Upload] item to display the “Profile Upload Page”.
STEP1: Click [Apply] button. The ‘’Profile Pack Page-2” will be displayed as
below.
STEP2: Click the [Browse] to select the new profile pack and click [enter]. You
can always get the latest version at our website.