Speco Technologies SIPMPBVFH User Manual

Page 48

Advertising
background image

2-44

[Stream 2] item to display the content page, Contents for both stream are identical. Refer

to the table below for how to configure each setting.

Parameters

Description

Encoder Type

Select the encoder’s compression type.

MPEG-4 / MJPEG / H.264

Resolution

Select the video resolution of the IP device.

Frame rate

Select the available frame rate from the drop down menu.

Video Bit
Rate Mode

Select the video bit rate mode.

Constant Bit Rate: The bit rate remains constant at all

conditions.

Variable Bit Rate: The video bit rate will vary based upon

scene complexity and amount of movement. The quality will

remain the same.

Quality

When encoder type is MPEG4 or H.264, and video bitrate mode
is “Variable Bit Rate” Select the quality value from High /
Medium / Low

GOP Length

When encoder type is MPEG4 or H.264. and video bitrate mode
is “Variable Bit Rate”. Select the Interval between two I-frames.
This is also called GOP Length. (Group of Picture) . Default
value is one I frame per second. The maximum length of GOP is
limited to 60.

Frame rate

Select the available frame rate from the drop down menu.

This puts a hard cap on the maximum bit rate allowed in any
given second of video streaming. Assigning a limited bit rate
may result in a few dropped frames rate when the stream data
overflows the allowed bit rate. Doing so will also disable Bit
Rate setting below.

Video Bit
Rate Mode

Select the video bit rate mode.
Constant Bit Rate: The video bit rate remains constant at all
conditions.
Variable Bit Rate: The video bit rate will vary based upon scene
complexity and amount of movement. The quality will remain
the same.

Video Max
Bitrate

This puts a hard cap on the maximum bit rate allowed in any
given second of video streaming. Assigning a limited bit rate
may result in a few dropped frames rate when the stream data
overflows the allowed bit rate. Doing so will also disable Bit
Rate setting below.

Video Bitrate

This is the target bitrate that the camera will attempt to provide
when using Constant Bitrate mode. The actual value will
fluctuate slightly based on scene changes.

Frame rate

Select the frame rate for each profile by choosing from the drop

Advertising
This manual is related to the following products: