Sony PCWA-C100 - Manual (Page 40)

40
Once you set up your Windows environment, install
the Wireless Palette, the Basic Setup Utility, and the
Custom Setup Utility software.
1
From the Start menu, click Run.
The Run dialog box appears.
2
Enter the name of the installer.
• If the computer has an internal CD-ROM drive,
enter “Q:\SETUP.EXE.” (“Q” indicates the name
of the internal CD-ROM. Your CD-ROM drive
may be identified with a different letter.)
• If you have copied the Wireless LAN folder from
the supplied CD-ROM to your computer’s hard
disk, say in the C:\Temp folder, when installing
the driver software on page 13, enter
“C:\Temp\WirelessLAN\SETUP.EXE.”
3
Click OK.
The Wireless LAN Utility Setup dialog box
appears.
4
Click Next.
The License Agreement dialog box appears.
5
Read the agreement and click Yes to accept.
The Choose Destination Location dialog box
appears.
6
Select the folder where you want to install the
software and click Next.
The Setup Type dialog box appears.
Installing software
Before Installing the
software:
• Install and connect the
Access Point.
• Install the driver
software. (page 13)
• Insert the Wireless
LAN PC Card. (page
12)
• Quit all Windows
programs.
z Tip
If you want to install the
software into another
folder, click Browse and
select the folder or
directly enter the folder
name.