Connecting the power cord – Sharp PG-D3510X User Manual

Page 29

Advertising
background image

25

Connections

When connecting to the LAN terminal using a LAN cable

LINK LED (green)
Illuminates when linked.

TX/RX LED (yellow)
Illuminates when transmitting/receiving data.

* To ensure safety, do not connect the LAN terminal

with any cables that may cause excessive voltage
such as a telephone line.

Hub

or

Computer

LAN cable (Category 5 type,
commercially available)

To LAN terminal

When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially
available).
When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially
available).

Note

Connecting the Power Cord

Plug the supplied power cord into the
AC socket on the rear of the projector.
Then plug into AC outlet.

AC socket

To AC outlet

Power cord
(supplied)

AC socket

To AC outlet

Power cord
(supplied)

Advertising
This manual is related to the following products: