Signal adjustment (“sig-adj” menu), Adjusting the computer image, Resolution setting – Sharp PG-D3510X User Manual

Page 49: Signal type setting, 1 adjusting the computer image, 2 resolution setting, 3 signal type setting, Useful featur es

Advertising
background image

45

Useful

Featur

es

Signal Adjustment (“SIG-ADJ” Menu)

Menu operation n Page

40

0

0

0

0

Phase

Clock

H-Pos

V-Pos

Reset

Auto

1024 x 768

0 IRE

Resolution

Signal Type

Video Setup

Auto

Video System

Signal Info 1024 x 768

H

48.3

kHz

/ V

60.0 Hz

SEL./ADJ.

ENTER

END

Pict.

SIG-ADJ

SCR

PRJ1

PRJ2

Net.

1

3
4

5
6

2

1 Adjusting the Computer Image

If the optimum image cannot be obtained with
Auto Sync adjustment, use the SIG-ADJ function.

Selectable

items

Description

Clock

Adjusts vertical noise.

Phase

Adjusts horizontal noise (similar to
tracking on your VCR).

H-Pos

Centers the on-screen image by
moving it to the left or right.

V-Pos

Centers the on-screen image by
moving it up or down.

To reset all adjustment items, select “Reset”
and press ENTER.
The adjustable range of “H-Pos” (H-Position)
and “V-Pos” (V-Position) may vary depending
on the screen resolution of the computer.

Note

2 Resolution Setting

Ordinarily, the type of input signal is detected and
the correct Resolution mode is automatically
selected. However, for some signals, the optimal
Resolution mode in “Resolution” may need to be
selected to match the computer display mode.

See “Checking the Input Signal” on page

46

for information on the currently selected input
signal.

Note

3 Signal Type Setting

This function allows you to select the input signal
type RGB or Component for COMPUTER/
COMPONENT 1 or 2.

Selectable

items

Description

Auto

Input signals are automatically
recognized as RGB or component.

RGB

Set when RGB signals are received.

YPbPr

Set when Component signals are
received.

Advertising
This manual is related to the following products: