Adjusting the projected image (“scr-adj” menu), Setting the resize mode, Adjusting the image position – Sharp PG-D3510X User Manual
Page 51: Keystone correction, Adjusting the projected image, Scr - adj” menu), 1 setting the resize mode, 2 adjusting the image position, 3 keystone correction, Useful featur es
Adjusting the Projected Image (“SCR-ADJ” Menu)
1 Setting the Resize Mode
Use this function to stretch the image
vertically or horizontally or when the edges of
the image cannot be seen.
For details of the Resize mode, see pages
2 Adjusting the Image
You can move the projected image vertically.
3 Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.
Select “Keystone” on the “SCR-ADJ”
menu and adjust with the slide bar.
for details of Keystone Correction.
The Keystone Correction can be adjusted up
to an angle of approximately ±40 degrees.
You can also press KEYSTONE on the
remote control to adjust Keystone Correction.