Projection (prj) mode, Ceiling-mount setup, Projection (prj) mode ceiling-mount setup – Sharp PG-D3510X User Manual

Page 24: Setting up the projector (continued), A ceiling-mount setup

Advertising
background image

20

Setting Up the Projector (Continued)

Projection (PRJ) Mode

The projector can use any of the 4 projection modes shown in the diagram below. Select the
mode most appropriate for the projection setting in use. (You can set the PRJ mode in “SCR-
ADJ” menu. See page

49

.)

Table mounted, front projection
[Menu item

➞ “Front”]

Table mounted, rear projection
(with a translucent screen)
[Menu item

➞ “Rear”]

Ceiling mounted, front projection
[Menu item

➞ “Ceiling + Front”]

Ceiling mounted, rear projection
(with a translucent screen)
[Menu item

➞ “Ceiling + Rear”]

a Ceiling-Mount Setup

It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this
installation. Before mounting the projector, contact your nearest Sharp Authorized Projector
Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold
separately).

Advertising
This manual is related to the following products: