Adjusting the projected image (“scr-adj” menu), Setting the resize mode, Adjusting the image position – Sharp PG-D3510X User Manual

Page 51: Keystone correction, Adjusting the projected image, Scr - adj” menu), 1 setting the resize mode, 2 adjusting the image position, 3 keystone correction, Useful featur es

Advertising
background image

47

Useful

Featur

es

Adjusting the Projected Image (“SCR-ADJ” Menu)

Menu operation n Page

40

SEL./ADJ.

ENTER

END

Resize

Image Shift

0

0

Keystone

OSD Display

Closed Caption

Overscan

Background
Setup Guide

PRJ Mode

On

Front

Wall Color

Language

Off

English

On

Off

Logo

On

Normal

Pict.

PRJ1

PRJ2

Net.

SIG

SCR-ADJ

9

8

0

5

6

4

3

2

1

7

1 Setting the Resize Mode

Use this function to stretch the image
vertically or horizontally or when the edges of
the image cannot be seen.

For details of the Resize mode, see pages

31

and

32

.

You can also press RESIZE on the remote
control to set the Resize mode. (See page

31

.)

Note

2 Adjusting the Image

Position

You can move the projected image vertically.

Q button

O button

This function only works in some Resize
modes. (See pages

31

and

32

.)

Note

3 Keystone Correction

When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.

Select “Keystone” on the “SCR-ADJ”
menu and adjust with the slide bar.

See page

29

for details of Keystone Correction.

O button

Q button

The Keystone Correction can be adjusted up
to an angle of approximately ±40 degrees.
You can also press KEYSTONE on the
remote control to adjust Keystone Correction.

Note

Advertising
This manual is related to the following products: