Keylock function, Selecting the quick start menu, Computer2 select – Sharp PG-D3510X User Manual

Page 56: 52 8 keylock function, 9 selecting the quick start menu, 0 computer2 select, A setting with the menu screen, A setting with the projector buttons

Advertising
background image

52

8 Keylock Function

Use this function to lock the operation buttons
on the projector.
This function can be set using either the menu
screen or ENTER on the projector.

a Setting with the menu screen

Selectable

items

Description

On

All buttons on the projector, except
STANDBY/ON, are locked.

Off

Turns off the Keylock function.

a Setting with the projector buttons

Locking the Operation Buttons

1

Hold

down

ENTER on the

projector for about 5 seconds
while the projector is being
turned on.

The Keylock function screen is displayed.

Use this function to lock the operation buttons
on the projector.
(Except STANDBY/ON button)

Note: You can release the keylock by holding
down ENTER on the projector for about 5 seconds.

PRJ - ADJ1

Return

On

SEL.

ENTER

END

2

Select “On”, then press

ENTER.

On-screen display

The Keylock function does not affect the
operation with the remote control buttons.
You cannot use the Keylock function while the
projector is warming up.

1

2

Taking the Keylock Off

Hold down ENTER on the projector for about
5 seconds.

On-screen display

Info

Even when Keylock function is set to “On”,
STANDBY/ON on the projector can be used
to turn on and off the power.
Keylock cannot be set while the projector is:
displaying the “Setup Guide” or “Menu”
screens, in Standby mode, warming up,
changing input signals, operating the Auto
Sync or Input Search function, in Freeze
mode or on the “System Lock” screen during
warming up.

9 Selecting the Quick

Start

Menu

Selectable items

Description

On

Pressing MENU displays the
Quick Start Menu screen.

Off

Pressing MENU displays the
Complete Menu screen.

0 COMPUTER2 Select

You can also use the MONITOR OUT terminal
as the COMPUTER/COMPONENT 2 terminal.
Select whether to use the terminal as an input
terminal or output terminal.

Selectable items

Description

Input

The terminal can be used as an
input terminal (COMPUTER/
COMPONENT 2).

Monitor Output

The terminal can be used as an
output terminal (MONITOR
OUT).

Set this before connecting the external
equipment.
The setting cannot be changed when Input
mode is “COMPUTER 2”.

Note

Adjusting the Projector Function (“PRJ-ADJ1/2” Menu)

(Continued)

Menu operation n Page

40

Advertising
This manual is related to the following products: