Basic operation, General control, Demonstration mode – Sharp MD-E9000H User Manual

Page 12: Opening and closing the cd compartment

Advertising
background image

12

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Basic Operation

- General Control -

■

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will
see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the DIS-
PLAY (DEMO) button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the DISPLAY (DEMO) button
again.

■

To turn the power on

Press the ON/STAND-BY button.

To set the unit to stand-by mode:

Press the ON/STAND-BY button again.

■

To change the display brightness (2 levels)

You can switch the display brightness by pressing the DIMMER button on the remote
control.

■

Opening and closing the CD compartment

The CD compartment cover is motorised.

When the power is turned on, you can open or close the CD compartment by pressing
the CD

7

(OPEN/CLOSE) button.

Caution:

●

Do not open or close the CD compartment cover manually. It may cause mal-
functions to the unit.

●

Be careful not to jam your fingers in the CD compartment cover.

General Control

Dimmed

Brightened

*MD9000H-E12-14

2001.4.20, 2:05 AM

12

Advertising