Md recording, Recording to a minidisc from the radio – Sharp MD-E9000H User Manual

Page 35

Advertising
background image

35

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

MD Recording

- Recording to a MiniDisc from the Radio -

MD-E9000H

Recording to a MiniDisc from the Radio

1

Tune in to a desired station (see page 22).

2

Load a recordable MiniDisc.

3

Select a recording mode by pressing one of the REC MODE but-
tons (SP, LP2, LP4).

●

At the same time, you can check the recordable time of the MD.

4

Press the REC button.

●

The unit will enter the recording stand-by mode.

5

Press the MD

06

06

06

06

06

button.

Notes:

●

Before recording an AM broadcast, enter the recording stand-by mode, and then
separate the AM loop aerial from the main unit. Adjust it so that the AM broadcast
can be tuned in most clearly.

●

During recording, you cannot change stations.

To interrupt recording:

Press the MD

06

button.

To resume recording, press the MD

06

button again.

To stop recording:

Press the MD

■

button.

The recording will stop and the track number will be written on the MiniDisc.

To record the track number whilst recording:

The recording is performed as a single track.
To identify different sections of a recording, you can increase the track number at
any point during the recording process by pressing the REC button.

●

The track number will increase by one, and then the recording will continue.

11

12

10

9

8

6

7

5

4

3

2

1

*MD9000H-E31-35

2001.4.20, 2:13 AM

35

Advertising