References, Error messages – Sharp MD-E9000H User Manual

Page 46

Advertising
background image

46

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

References

- Error Messages -

Error Messages

Error messages

BLANK MD

Can’t COPY

Can’t EDIT

Can’t READ
(

:Number or

symbol)

Can’t REC

Can’t WRITE

DISC FULL

Er-CD 20

Er-MD

(

:Number or

symbol)

EDIT OVER

MD NO DISC
CD NO DISC

Remedy

●

Replace it with another disc.

●

Replace the CD.

●

Change the stop position of the
track and then try editing it.

●

Replace it with another disc.

●

Erase the disc and try record-
ing again.

●

Re-record or replace the
MiniDisc.

●

Set this unit to the stand-by
mode and try to write the
TOC again. (Remove any
source of shock or vibration
whilst writing.)

●

Replace the disc with another
recordable disc.

●

Set this unit to the stand-by
mode and turn the power on
again.

●

Set this unit to the stand-by
mode and turn the power on
again.

●

Decrease the number of
tracks.

●

Replace it with a disc that has
enough time to record.

●

Load a MiniDisc.

●

Reload the MiniDisc.

●

Load a CD.

●

Reload the CD.

Meaning

●

Nothing is recorded.
(Neither music nor disc name
is recorded.)

●

You tried to record from a
copy prohibited CD.

●

A track cannot be edited.

●

The disc is damaged.

●

TOC information cannot be
read.

●

MiniDisc not specified.

●

Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.

●

The TOC information could
not be created properly due
to a mechanical shock or to
scratches on the disc.

●

The disc is out of recording
space.

●

The CD cover is not working
properly.

●

MiniDisc is not working prop-
erly.

●

You chose 21 or more tracks
for track editing.

●

The remaining time available
for recording is short.

●

A MiniDisc has not been
loaded.

●

The MiniDisc data cannot be
read.

●

A CD has not been loaded.

●

The CD data cannot be read.

When an error message is displayed, proceed as follows:

Meaning

●

The number of characters for
the disc name or track name
exceeds 40.

●

The data recorded on this
disc is not audio data.

●

You tried to record on a play-
back-only disc.

●

The disc is write protected.

●

The temperature is too high.

●

TOC information recorded on
the MD does not match the
MiniDisc specifications or it
cannot be read.

●

There is no space left for re-
cording track numbers.

●

There is no space left for re-
cording character informa-
tion.

●

The data contains an error.

●

MiniDisc not specified.

●

MiniDisc is not working prop-
erly.

●

Tuner is not working properly.

Error messages

NAME FULL

NOT AUDIO

PLAYBACK MD

PROTECTED

TEMP OVER

TOC FORM

(

:Number or

symbol)

TOC FULL

TOC FULL1

? MD DISC

POWER?

ER-TU
(

:Number or

symbol)

Remedy

●

Shorten the disc or track
name.

●

Select another track.

●

Replace the disc.

●

Replace it with another re-
cordable disc.

●

Move the write protection tab
back to its original position.

●

Set this unit to the stand-by
mode and wait for a whilst.

●

Replace it with another disc.

●

Erase the disc and try record-
ing again.

●

Replace it with another re-
cordable disc.

●

Replace it with another re-
cordable disc.

●

Erase the needless charac-
ters.

●

Replace it with another disc.

●

Set this unit to the stand-by
mode and turn the power on
again.

●

Set the unit to the stand-by
mode and turn the power on
again.

*MD9000H-E44-48

2001.4.20, 2:16 AM

46

Advertising