Md editing, Titling a minidisc, Creating disc and track names – Sharp MD-E9000H User Manual
Page 36
36
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
MD Editing
- T
itling a MiniDisc -
1
Press the MD
■
button and load a MiniDisc (see page 17).
2
Disc name
Track name
3
Within 10 seconds, press the MEMORY/ENTER button.
●
The unit will enter the character input mode.
●
To cancel the operation, press the MD
■
button.
4
Press the 1 - 10, SYMBOL/TIME and >10 buttons to enter charac-
ters.
●
The >10 button allows switching between capital and small letters.
●
You can enter symbols by pressing the SYMBOL/TIME button (see page
37).
5
When the name has been entered, press the MEMORY/ENTER
button.
Titling a MiniDisc
Cursor
■
Creating disc and track names
You can give a name to discs and tracks.
One disc name and up to 255 track names can be created per disc (a maximum of
40 characters for the disc and each track name and a total of 1,700 characters can
be entered).
●
Playback-only MiniDiscs cannot be edited.
Whilst in the stop mode of
MiniDisc, press the NAME/TOC
button, and select “DISC
NAME” using the
5 / 3
5 / 3
5 / 3
5 / 3
5 / 3
or
2/4
2/4
2/4
2/4
2/4
button.
During playback or in the
pause mode of MiniDisc, press
the NAME/TOC button, and se-
lect “TRACK NAME” using the
5/3
5/3
5/3
5/3
5/3
or
2/4
2/4
2/4
2/4
2/4
button.
*MD9000H-E36-40
2001.4.20, 2:14 AM
36