Md editing, Editing a recorded minidisc (continued) – Sharp MD-E9000H User Manual
Page 39
39
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
MD Editing
- Editing a Recorded MiniDisc -
MD-E9000H
■
To move programmed tracks (programmed
move)
1
Programme tracks in the desired order (steps 1-5, page 19).
2
Press the NAME/TOC button, and within 10 seconds, select
“PRGM MOVE” using the
5/3
5/3
5/3
5/3
5/3
or
2/4
2/4
2/4
2/4
2/4
button.
3
Within 10 seconds, press the MEMORY/ENTER button.
●
To cancel the operation, press the NAME/TOC button or MD
■
button.
4
Press the MEMORY/ENTER button again.
●
The tracks will be moved, and the unit will exit the programmed move mode.
Notes:
●
The tracks that are not included in the programmed selections will be put at the end
of the new track numbers.
●
If a track has been programmed more than once, the initial programme position will
have priority.
Editing a Recorded MiniDisc (continued)
■
To move a track
1
Press the MD
■
button and load a MiniDisc (see page 17).
2
Whilst in the stop mode, select the track you want to move using
the
5/3
5/3
5/3
5/3
5/3
or
2/4
2/4
2/4
2/4
2/4
button. Or start playing the track and then
press the MD
06
06
06
06
06
button.
3
Press the NAME/TOC button, and within 10 seconds, select
“MOVE” using the
5/3
5/3
5/3
5/3
5/3
or
2/4
2/4
2/4
2/4
2/4
button.
4
Within 10 seconds, press the MEMORY/ENTER button.
5
Select a new track position using the
5/3
5/3
5/3
5/3
5/3
or
2/4
2/4
2/4
2/4
2/4
button.
●
To cancel the operation, press the MD
■
button.
6
Press the MEMORY/ENTER button again.
●
The track is moved, and the unit is stopped at the beginning of the moved
track.
Notes:
●
When a track has been moved, the other tracks will be newly numbered automati-
cally.
●
This function cannot be used in the random play mode.
11
12
10
9
8
6
7
5
4
3
2
1
*MD9000H-E36-40
2001.4.20, 2:14 AM
39