Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 23)

2.Installation
17
2.1.2 Create environment for setup
The first step is to connect the cables to the MVDS transmitter and receiver, and to
the player, monitor(s) and PC. All the configuration can be performed via a wired
LAN network.
1.
Connect the LAN cables
Connect the MVDS transmitter and receiver(s) to the PC using LAN cables.
Connect the VGA cables
Connect the player to the MVDS Transmitter, and connect the monitor(s) to the
receiver(s).
2.
Connect the audio cables
Connect the player to the MVDS transmitter, and connect the speaker(s) to the
receiver.
3.
Power ON
Turn on the MVDS transmitter and receiver, the PC, the player and the
monitor(s) and speakers.
4.
Start output from the player
Output a movie (1280 x 768) from the player.
Or to make an adjustment to the screen image at the MVDS transmitter, output
a still image (white or any other light color) from the player.
5.