Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 64)

58
MVDS X-1 User's Guide
Name Details
Video
Configuration
H Width Specify a width of horizontal synchronization signal by dot clock.
H Period Specify a period for horizontal synchronization by dot clock.
H Back Porch
Specify the Back Porch of horizontal synchronization signal
by dot clock.
V Width
Specify a width of vertical synchronization signal by
horizontal synchronization signal.
V Period
Specify a period for vertical synchronization signal by
horizontal synchronization signal.
V Back Porch Specify the Back Porch by horizontal synchronization signal.
H.Width Offset
Displays the offset value for H.Width setting that you may
have configured from receivers. This value is added to
H.Width setting and then take effect in the video image.
(* The configuration from receiver is not currently supported.)
H.Period Offset
Displays the offset value for H.Period setting that you may
have configured from receivers. This value is added to
H.Period setting and then take effect in the video image.
(* The configuration from receiver is not currently supported.)
H.Back Porch Offset
Displays the offset value for H.Back Porch setting that you
may have configured from receivers. This value is added to
H.Back Porch setting and then take effect in the video image.
(* The configuration from receiver is not currently supported.)
V.Width Offset
Displays the offset value for V.Width setting that you may
have configured from receivers. This value is added to
V.Width setting and then take effect in the video image.
(* The configuration from receiver is not currently supported.)
V.Period Offset
Displays the offset value for V.Period setting that you may
have configured from receivers. This value is added to
V.Period setting and then take effect in the video image.
(* The configuration from receiver is not currently supported.)
V.Back Porch Offset
Displays the offset value for V.Back Porch setting that you
may have configured from receivers. This value is added to
V.Back Porch setting and then take effect in the video image.
(* The configuration from receiver is not currently supported.)
Serial
Configuration
Baudrate (bps) Specify a baudrate.
Bit length Specify a bit length.
Stop bit Specify a stop bit.
Parity Specify a parity check method.
Flow control Specify a flow control method.
Data timeout Specify a serial input timeout by millisecond.
Buffer Buffering Level Specify the number of buffer for retransmission.