Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 31)

2.Installation
25
Adjusting a screen image (at transmitter)
Connect to the web page of the transmitter to adjust a screen image appropriate
for the player.
If you are sure of what value to set for screen image, click Video/Audio/Data under
Configuration and configure each setting. If you are not sure what values to set,
you can use the auto-adjustment feature to automatically adjust the screen image.
The use of the auto-adjustment function is described below:
1.
Output a still image (white or any other light color) from the player.
2.
You can use the default values, however, if you want to make better
adjustment, access the Video/Audio/Data Configuration page by clicking
Video/Audio/Data under Configuration, and enter the following values.
Gain 32
Offset 160
Filter 15
3.
Select Video/Audio under Tools and click the Start button next to
Maintenance screen mode. Click the Stop button to take effect.
4.
Select Video/Audio under Tools and click the Start button next to Video
signal auto configuration. Auto-adjustment will begin. If the video signal is
not scanned correctly or an error occurs, configure it manually.