Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 68)

62
MVDS X-1 User's Guide
Configures Dynamic Node control for receivers.
Shows or Changes which transmitter the receivers should connect to.
Dynamic Node (at receiver)
Name Details
Node
Configuration
Dynamic Coordinators
Display the list of discovered groups. The group where the
receiver belongs to is checked on its radio button. The group
number is the last 8 digits of MAC Address of the transmitter.
To switch to the other group, check the radio button of that
group. If "No group" is checked, the receiver will not receive
data.
<Dynamic Node>
Use this when you switch the group manually.
Note