Silex technology Multicast Video Distribution System MVDS X-1 - Manual (Page 65)

3.Monitor and Maintenance
59
Configures Static Node control of transmitter. Usually, the default settings are used.
Static Node (at transmitter)
Name Details
Node
Configuration
Node List Method Specify a node search method.
Static Node 0
Specify an IP address for node when Node List Method is set
to Static.
Static Node 1
Static Node 2
Static Node 3
Static Node 4
Static Node 5
Static Node 6
Static Node 7
- Use this only for irregular situations such as when you need to specify the node for your
network environment. Usually, the default settings are used.
<Static Node>
Use this when you specify receivers. Up to 8 receivers can be specified.
<Dynamic Node>
Change the method of transmission to receiver.
Note