Sony MV-7101DS - Manual (Page 12)

12
Operation for Monitor
Opening the display
monitor
1
Press (OPEN) to open the display
monitor.
2
Press (POWER) to turn on the monitor.
Tip
If your car has no ACC (accessory) position on the
ignition key switch and you set the POWER SELECT
switch to the B position (for details, refer to the
installation/connections manual), be sure to press
(POWER) on the monitor to turn on the player and
the monitor.
Returning the display monitor to its
enclosure
Close the display monitor until it clicks. The
monitor turns off automatically.
Notes
• Be careful not to catch your finger in the display
monitor when closing.
• Do not put any foreign objects between the LCD
panel and the enclosure when closing.
POWER
OPEN 30˚
180˚
120˚
Adjusting the tilt and swivel
The display monitor can be adjusted within the
angles shown.
Tips
• Before closing the display monitor, make sure
that the monitor is turned and facing the
enclosure (you will hear a click).
• The monitor stores the input mode you set, even
if you turn off the monitor.