Sony MV-7101DS - Manual (Page 13)

13
POWER INPUT
VIDEO1
NTSC
VIDEO1
PAL
Selecting the input source
You can select the input source and color
system for the monitor. The color system
differs, depending on your country. You can
change the TV color system for the monitor.
1
Press (POWER).
The monitor is turned on.
Tip
If your car has no ACC (accessory) position on the
ignition key switch and you set the POWER SELECT
switch to the B position (for details, refer to the
installation/connections manual), be sure to press
(POWER) on the monitor to turn on the player and
the monitor.
2
Press (INPUT) repeatedly to select
“VIDEO 4.”
Each time you press (INPUT), the indication
changes in the following sequence:
VIDEO 1* c VIDEO 2* c VIDEO 3* c
VIDEO 4 c VIDEO 1*
* When connecting optional products, be sure
to select the proper input mode. For details,
refer to the connection diagram of
installation/connection manual.
3
Press M or m to select PAL or NTSC color
system.
Press either button while the source
indication “VIDEO 4” is displayed.
When NTSC Video is selected:
When PAL Video is selected:
Tip
You also have to set the same TV color system for
the player as the one you set here for the monitor.
See “Selecting the TV color system — COLOR
SYSTEM” (page 29).