SMC Networks SMC Barricade g SMCWBR14-G2 - Manual (Page 121)

T
ROUBLESHOOTING
A-3
Management Problems
Cannot connect
using the web
browser
• Be sure to have configured the BARRICADE with a
valid IP address, subnet mask, and default gateway.
• Check that you have a valid network connection to the
BARRICADE and that the port you are using has not
been disabled.
• Check the network cabling between the management
station and the BARRICADE.
Forgot or lost
the password
• Press the Reset button on the bottom panel (holding
it down for at least six seconds) to restore the factory
defaults.
Troubleshooting Chart
Symptom Action