SMC Networks SMC Barricade g SMCWBR14-G2 User Manual
Page 83
S
ECURITY
4-39
The table below lists the Intrusion Detection parameters and their
descriptions.
Parameter
Defaults Description
Intrusion Detection
Feature
SPI and Anti-DoS
firewall protection
No
The Intrusion Detection feature of the
BARRICADE limits the access of incoming traffic
at the WAN port. When the Stateful Packet
Inspection (SPI) feature is turned on, all incoming
packets are blocked except those types marked
with a check in the SPI section at the top of the
screen.
RIP Defect
Disabled If the router does not reply to an IPX RIP request
packet, it will stay in the input queue and not be
released. Accumulated packets could cause the
input queue to fill, causing severe problems for all
protocols. Enabling this feature prevents the
packets accumulating.
Discard Ping to
WAN
Don’t
discard
Prevents a ping on the router’s WAN port from
being routed to the network.