Tcp/ip configuration, Tcp/ip configuration -2 – SMC Networks SMC Barricade g SMCWBR14-G2 User Manual

Page 28

Advertising
background image

TCP/IP C

ONFIGURATION

3-2

TCP/IP Configuration

To access the Internet through the BARRICADE, you must configure the
network settings of the computers on your LAN to use the same IP subnet
as the BARRICADE. The default network settings for the BARRICADE
are:

IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0

Note: These settings can be changed to fit your network requirements,

but you must first configure at least one computer

to access the

BARRICADE’s web configuration interface in order to make the
required changes. (See “Configuring the BARRICADE” on page
4-1 for instructions
on configuring the BARRICADE.)

Advertising