SMC Networks SMC Barricade g SMCWBR14-G2 - Manual (Page 24)

I
NSTALLATION
2-6
Wall-Mount Installation
There are two wall-mount holes at the bottom of the BARRICADE.
Before drilling two holes into the wall, make sure the holes are 87 mm
apart.
1. Choose a suitable location for the BARRICADE.
Note: It should be accessible for installing, cabling and maintaining the
device.
2. Measure the distance of the two wall-mount holes.
3. Drill two holes into the wall.
4. Insert a screw into each hole.
Note: Leave 5 mm exposed of the screw head.
5. Attach the BARRICADE to the wall with two wall-mount slots, and
then slide the device down until the screws fit firmly into the slots of
the device.
87 mm