Sharp UX-300 - Manual (Page 50)

<P=004>
Using the HOLD/SEARCH key
If you don’t remember the Rapid Key or Speed Dial number in which
you have stored a particular fax number, you can search for the
number by following the steps below. Once you have found the
number, you can dial it and transmit the loaded document by simply
pressing the START/MEMORY key.
1
Load the document(s).
The display will show:
READY TO SEND
••••
Set the resolution and/or contrast if
desired. RESOLUTION
2
Press the HOLD/SEARCH key and
then the 1 key.
HOLD/SEARCH
1
3
Enter the first letter of the stored name
by pressing the appropriate number
key (the key below the marked letter)
one or more times until the letter
appears in the display. If the name
begins with a special character or
number, press 1.
••••
If you don’t remember the first
letter, go to Step 4 (you will scroll
through the list from the beginning).
••••
If a name wasn’t stored for the
number, press 0. This will cause
numbers, not names, to appear when
you scroll.
2
5
8
GHI JKL MNO
TUV WXYZ PQRS
ABC DEF
1
4
7
3
6
9
Sending a Fax by Automatic Dialing
48