Sharp UX-300 - Manual (Page 81)

UX300U-SFAJ YF <P=001>
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes
from parties which you specify. This saves paper by not printing out
unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 13 to
YES as explained in Chapter 8, and then enter the fax numbers from
which you do not want to receive faxes as shown below. If you are
using the Caller ID function, you can also enter voice numbers.
Comments:
••••
Up to 5 numbers can be entered in the Anti Junk Number List.
••••
The Anti Junk function will not operate for a number which has also been
stored as a Priority Call number.
••••
To clear a number from the Anti Junk Number List, you need to know the
1-digit number which identifies it. If you have forgotten this number, print
out the Anti Junk Number List as explained in Chapter 9.
1
Press the keys shown at right.
STORE JUNK # will appear in the
display.
2
Press 1 to store a number in the Anti
Junk Number List, or 2 to clear a
number from the list.
or
3
Storing: Enter a 1-digit number from
1 to 5. This number identifies the
fax/voice number you will store in the
next step.
Clearing: Enter the number which
identifies the fax/voice number you
want to clear, and go to Step 5.
(Example)
FUNCTION
3
1 2
1
SET CLEAR
7.
S
p
ec
ia
l
Fu
nc
ti
on
s
Blocking Reception of Unwanted Faxes
79