Sony GV-D200 - Manual (Page 24)

24
(1) Press DIGITAL EFFECT during playback. The digital effect indicator appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
The indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bars appear.
In the STILL and LUMI. modes, the still image is stored in memory.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect as follows:
STILL – The rate of the still image you want to superimpose on the moving
image
FLASH – The interval of flash motion
LUMI. – The color scheme of the area in the still image which is to be masked
with a moving image
TRAIL – The vanishing time of the incidental image
When the number of bars on the monitor screen getting bigger, the digital
effect will be getting bigger.
To cancel the digital effect function
Press DIGITAL EFFECT again.
Watching a tape with special performances – Digital effect
3
4
LUMI.
1
2
LUMI.
DIGITAL
EFFECT