Sony GV-D200 - Manual (Page 26)

26
Your VCR goes forward or backward to stop automatically at a desired scene having a
counter value of “0:00:00”.
Use the Remote Commander supplied with a Sony digital video camera recorder for
this operation.
For details, refer to the operating instructions of the digital video camera recorder.
Use this function, for example, to view a desired scene later on during playback.
(1) Press DISPLAY during playback.
(2) Press ZERO SET MEMORY on the Remote Commander at the point you want
to locate later. The counter shows “0:00:00” and the ZERO SET MEMORY
indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter’s zero point. The tape stops
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears and the time code appears.
(5) Press N. Playback starts from the counter’s zero point.
Notes
•The zero set memory function works only for tapes recorded in the Digital8 system.
•When you press ZERO SET MEMORY again before rewinding the tape, the zero set
memory function is canceled.
•There may be a discrepancy of several seconds from the time code.
If a tape has a blank portion between recorded portions
The zero set memory function may not work correctly.
Quickly locating a scene
– Zero set memory
DISPLAY
ZERO SET MEMORY