Sony GV-D200 - Manual (Page 32)

32
To superimpose the title while you are recording
Press TITLE while you are recording, and carry out steps 2 to 5. When you press the
SEL/PUSH EXEC dial at step 5, the title is recorded.
To select the language of a preset title
If you want to change the language, select before step 2. Then select the desired
language and return to step 2.
To use the custom title
If you want to use the custom title, select
in step 2.
Title setting
• The title color changes as follows :
WHITE y YELLOW y VIOLET y RED y CYAN y GREEN y BLUE
• The title size changes as follows :
SMALL y LARGE
You cannot input more than 12 characters in LARGE size.
• The title position changes as follows :
1y 2y 3y 4y 5y 6y 7y 8y 9
When the number of the title position getting larger, the title is positioned in getting
lower on the monitor screen.
When you select the title size to LARGE, you cannot choose position 9.
When you are selecting and setting the title
You cannot record the title displayed on the screen.
While you are playing back
You can superimpose a title. However, the title is not recorded on the tape.
You can record a title when you dub a tape by connecting your VCR to the other VCR
with the A/V connecting cable. If you use the i.LINK cable (DV connecting cable) (not
supplied) instead of the A/V connecting cable, you cannot record the title.
Superimposing a title