Sony SIR-4150 - Manual (Page 14)

COLOR IR CAMERA User’s Manual 27 COLOR IR CAMERA User’s Manual 26
Operating Your Camera
The background noise in the low light level decreases automatically as the level
of gain changes.
1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
SSNR (Samsung Super Noise reduction)
OFF : There is no reduction in noise level.
LOW : There is a small reduction in noise level with almost no ghost
image.
MIDDLE : The most effective mode. There is a sufficient reduction in noise
levels without causing much ghost imaging.
HIGH : The level of noise is reduced greatly, however there is an increase
in ghost imaging.
• When AGC is turned off, SSNR does not operate.
Note
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT
SENS UP helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
AUTO : Low light level auto mode
OFF
: The function does not operate.
SENS UP (Low illuminance)
• When SHUTTER is in the manual mode, SENS UP does not operate.
• When AGC is turned off, SENS UP does not operate.
Note
3. Please press the SETUP button when all the settings are complete.
• The maximum storage magnification in low light level can be adjusted by pressing
the SETUP button in 'AUTO' mode.(X2~X128)
• As the magnification increases, the screen gets brighter; moving object gets more
afterimage.
• If storage magnification is increased while SENS UP is operating, it may cause
noise, and spots may appear; however this is normal.
Note
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF