Sony SIR-4150 - Manual (Page 17)

COLOR IR CAMERA User’s Manual 33 COLOR IR CAMERA User’s Manual 32
Operating Your Camera
• Please adjust the size of the area to be observed by using the UP, DOWN, LEFT
or RIGHT button.
• Please press the SETUP button to save the changes and complete the setting.
• There is no ‘MD’ output signal. ‘MD’ is on screen display only words.
Note
• Please set CAM ID of CAMERA and external communication control device equally.
Note
PRIVACY : Mask privacy area you do not wish to appear on the screen.
- OFF : Cancels the PRIVACY mode.
- ON : Operates the PRIVACY mode.
• Please press the SETUP button.
• Please select the area you do not wish to appear from the 4 areas in AREA SEL
mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be concealed by using the UP, DOWN,
LEFT or RIGHT button.
COM ADJ :
When wish to control CAMERA by external communication control device, it is
function that set up CAMERA's communication states and protocol.
• CAM ID : Assign ID number to the camera. It is restricted available to set
ID from 1~255
• DISP CAMID : Displays CAM ID on the top left of the screen.
• BAUD RATE : Configure baud rate from 9600bps, 19200bps, 38400bps,
57600bps.
• UART MODE: Configure parity bit to NONE,EVEN, or ODD. Data bit is set to 8bit
and stop bit to 1bit.
• END
MIRROR ON MIRROR OFF
IMAGE ADJ : Includes image quality or special function factors.
• MIRROR : Sets a horizontal image inversionj.