Sony D-F200 - Manual (Page 7)

7
To Press
Play (from the point you stopped) u
Play (from the first track) u for 2 seconds or more
Pause u
Stop x* 2
Find the beginning of the current track (AMS* 1 ) .once quickly* 2
Find the beginning of the previous tracks (AMS) .repeatedly* 2, * 3
Find the beginning of the next track (AMS) > once quickly* 2, * 3
Find the beginning of the succeeding tracks (AMS) > repeatedly* 2, * 3
Go backwards quickly Hold down .* 2
Go forward quickly Hold down >* 2
* 1 Automatic Music Sensor
* 2 These operations can be done during both play and pause.
* 3 After you have played the last track, you can return to the beginning of the first track by pressing > .
Similarly, if you are at the first track, you can locate the last track by pressing ..
About the display
• When you press u after changing the CD or turning off and on the player, the total number
of tracks in the CD and total playing time appear for about two seconds.
• During play, the track number and the elapsed playing time of the current track appear.
• During pause, the elapsed playing time flashes.
When closing the lid of the CD player with the power supply
attached
While the “disc” flashes in the display, the CD starts rotating and will stop after the CD player
reads the disc information. This helps to shorten the waiting time before playback starts.
If the volume level does not increase
Is AVLS set to “LIMIT”? Set AVLS to “NORM.” For details, see “Protecting your hearing
(AVLS).”
About CD-Rs/CD-RWs
This CD player can play CD-Rs/CD-RWs recorded in the CD-DA format*, but playback
capability may vary depending on the quality of the disc and the condition of the recording
device.
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for the Audio
CDs.
Removing the CD
Remove the CD while pressing the pivot in the
center of the tray.
Playing a CD